Borntun Pneumatic Air Needle Scalers Gun Air Rust Remover Opening Holes 19pcs 3mm*180mm Needles Removing Metals Rust Burrs Weld

Borntun Pneumatic Air Needle Scalers Gun Air Rust Remover Opening Holes 19pcs 3mm*180mm Needles Removing Metals Rust Burrs Weld
  • Продавецleafexpose.us
  • Список ценUS $88.00piece
  • Продажная ценаUS $88.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,7 (120)

Oписание продукта

 
Single-action Trigger Air-paint Control Airbrush Kit  0.2mm/0.3mm/0.5mm Needle Multi- Capacity Air Brush Spray Gun Paint Art  SP166AKTH
 
Img9141_Treva_Outside_1
 
Description:
  • SIZE:15cm*10cm
  • COLOUR:Copper Plating,Tail handle black
  • WEIGHT:450g
  • MATERIAL:Copper
Overview:
 
This multi-purposed and gravity feed dual action air brush allows you to control color and quantity  of air with a finger as you want. It sprays an entire range of stipple effects from very fine to coarse textures. Perfect for airbrush, model, paint (car, bicycle, bike, etc.), airbrush tattoos, nail design and much more. 
 
Single-action technology:
 
Control of the color and quantity of air with a fingerApplications range: airbrush, model, paint (  car, bicycle, bike, etc. ), airbrush tattoos, nail design and much more. 
 
 
 
Features:
Single-action Trigger Air-paint Control. Easy to handle. Light weight die cast for strong power.Dual  action trigger design allows users to determine
the quantity of air and fluid released.Provides superb atomization & incredible control.
 
Product parameters:
  • Nozzle Dia:Airbrush on 0.3, parts 0.2 and 0.5
  • Standard Nozzle Dia.: 0.3mm
  • Cup Capacity: 2cc 5cc 13cc
  • Working Pressure:15-50psi
  • N.W./G.W.: 398g/450g 
 
Package Includes:
  • 1 x Airbrush
  • 3 x Cup 2cc\\5cc\\13cc
  • 1 x Nozzle Wrench
  • 1 x Instruction
  • 1 x 0.2mm nozzle
  • 1 x 0.5mm nozzle
  • 1 x 0.5mm nozzle cap
  • 1 x 0.2mm jet needle
  • 1 x 0.5mm jet needle
  • 1 x Air inlet joint
  • 1 x Joint conversion
  • 1 x Air hos
 
kindly Note: 
Please receive airbrush after debugging to the best state, and then use a clean water test, atomization is normal, you can use. 
Please use the stability, if dropped on the ground, may affect the use effect, or damage. 
After use, please clean the airbrush, avoid clogging, effect the next time you normally use. 
In order to protect the item well, a professional person to change needle and nozzle will be recommend. 
To prolong your airbrush gun’s life span, please clean your gun in a proper way:It will be better to clean with water thinner like
Alcohol after water paint. oil paint should be cleaned with oil thinner like ethyl acetate. 
 
262912628826293262892629026292
 
Q&A: 
 
1. Problems:Paint nozzle leak or abnormal condition of spray. 
Possible reason: The needle is bent or distorted. 
Solutions: change accessories/parts 
Possible reason: Poor connection of nozzle and needle 
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net, then use the needle  touch the nozzle back and forth; screw tightly
the needle chucking net. 
 
2. Problems:Could not spray or bad atomization 
Possible reason: nozzle clogged 
Solutions: clean the nozzle by solvent 
Possible reason: the needle chucking net is loose 
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle  and put it back,repeat this action a few times ;
screw tightly the needle chucking net. 
Possible reason: operation button doesn\'t work 
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle  and put it back,repeat this action a few times ;
screw tightly the needle chucking net. 
Relative hot selling in our store,please click:
 

More Airbrush Accessories For You: